CORALLY SHOGUN XP 6S TRUGGY 1/8 LWB BRUSHLESS RTR
Rule the Track with the Shogun Racing Truck!
Want to dominate the track and stay ahead of your friends? The Shogun is going to be at the top of the timing shees! The Shogun from Team Corally is simply the meanest, baddest and roughest LiPo-powered truck on the planet! Fitted with a 2050KV motor that can take up to 6S power, the Shogun is super-fast on dirt, gravel, grass, jumps and more! If you want massive speed and huge air in a racing truck package, you have found your perfect vehicle!
With a super-durable, all-metal four-wheel drivetrain, fully independent competition-style suspension, racing chassis and aerodynamic racing design, this is the ultimate bashertruck for anyone looking for massive jumps and frightening speeds!
All-Season Driving in All Conditions!
With a full suite of water-resistant electronics, the Shogun is ready for driving anywhere you want, any time you want! Not only is the electronic speed controller resistant to splashes of water and mud, but the steering servo and receiver are also protected from the elements by special coatings applied at the factory. The receiver is further protected inside an electronics box that keeps dust and mud away from electrical connections. It goes without saying that we have only used rubber-sealed ball bearings. You can take the Shogun anywhere! (Please note: no RC vehicle should beoperated submerged in water or mud. Take care when driving in extreme conditions, and proper maintenance such as cleaning and lubricating should take place after driving in mud, water or near salt water.)
RACING STYLE CHASSIS FOR EXTREME PERFORMANCE!
Taking cues from professional championship-level RC vehicles, the Shogun uses a long-wheelbase, flat pan-style chassis for the most efficient chassis layout possible. With a forward weight distribution,the weight of the drivetrain and all the components are kept as close to the front as possible. Substantial braces front and rear provide extra stiffness to allow the aluminum big bore shocks and HiCC8 composite suspension parts to dowhat they’re meant to do. The Team Corally SPL System locks the spring perches and prevent from losing the perches during hardest shock action, while the front and rear mounted Team Corally RSP Sway Bar System keeps the Kronos plantedin corners and ensures a consistent handling in all conditions.
MASSIVE 2050KV BRUSHLESS POWER!
With the Team Corally Kuron 2050KV 4-pole motor mounted on the extremely torsion-resistant 2-piece sliding motor mount, you can be sure to get the maximum speeds out of the box for insane acceleration, massive top speeds and monster big-air stunts! The motor is fitted with a hardened steel pinion gear, which spins a hardened steel spur gear attached to the centre gear differential. You want huge speeds? You can get them with the pull of a trigger! Speeds of over 110 km/h (70+ mph) are easy – just fit big enough batteries!
LIPO POWER READY!
The battery holder of the Shogun can fit batteries packs in all the popular sizes, and is adjustable for maximum versatility. The Team Corally Kuron 2050KV motor can use batteries that output between 2S and 6S power, giving you speeds of over 110 km/h (70+ mph)!!
Please Note: A 50C rated battery or higher is required for optimal results when running on 6S.
TRIPLE DIFFERENTIAL ALL-METAL DRIVETRAIN
Just like serious competition-level RC vehicles, the Shogun is fitted with silicone fluid-filled + sealed differentials at the front, rear and centre. These act as limited-slip differentials to make sure the full amount of power from the 2050KV Kuron motor gets to the tyres. With easy diff removal as standard, you can even tune the differentials to vary the amount of traction at either end of the truck! Inside the differentials, you’ll find a complete set of metal gears, and metal outdrives that connect with the steel centredriveshafts that connect to the front and rear differentials. The front axles are driven by CVD driveshafts, and the rear axles are driven by metal dogbone shafts. The entire drivetrain is supported by solid 8x16x5mm rubber sealed ball bearings for maximum efficiency.
INCREDIBLY TOUGH RACING SUSPENSION!
Just like the fastest competition racing buggies and trucks on the market today, the Shogun features extra-strong pivot ball style front suspension featuring steel pivot balls and steering turnbuckles as well as super-durable composite suspension arms. The rear suspension features upright hubs and steel camber link turnbuckles. At all four corners, extra-thick suspension arms madefrom HiCC8 composite and threaded 16mm big bore oil-filled shock absorbers make sure that the tyres stay in contact with the ground for maximum forward traction – unless you’re flying through the air, of course!
HIGH PERFORMANCE MULTI-PIN TYRES!
The tall rubber tyres feature thousands of tiny pins for maximum grip on most off-road surface. Each tyre is glued onto super-rugged multi-spoke wheels and mounted onto 17mm hex hubs – the same kind of hardware used for top-spec racing machines! The soft rubber tyres are perfect for traction on all kinds of terrain – hard-pack dirt, grass, gravel and more are absolutely perfect terrain for the Shogun!
VARIOPROP S2R STEERING WHEEL CONTROLLER
The Shogun is fully controlled by the ergonomically designed pistol-grip style radio transmitter, which features the latest 2.4GHz technology for interference-free control of your Shogun from up to 300m away! The realistic steering wheel design makes driving intuitive and just like driving a real truck! The pistol grip trigger provides perfect control of the throttle, with forward and reverse controls combined in a single control. Learning how to control the Shogun is quick and easy with the S2R controller!
The Shogun is the ideal truck to take to the race track or the big jumps – whichever you choose! With huge amounts of power at the pull of your finger, it can set fast lap times or attack giant half-pipes with ease! The suspension and chassis are designed to take huge amounts of abuse and everything on the Shogun is designed to be tuned for maximum speed, performance and power!
- Pre-built racing style truck with electronics, bodyshell and tyres installed
- Team Corally TOROX 185 ESC 3-6S with LiPo protection (programmable)
- Team Corally Kuron 2050kV 4-pole brushless motor 2-6S
- Varioprop® CR-7220-MG High Torque Digital Servo, Metal Gear, 20 Kg Torque
- Aluminium servo arm
- Ergonomic Varioprop® S2R transmitter, with interference-free 2.4GHz technology
- Separate splash-proof anddustproof electronic box with transponder mount
- Adjustable battery holder for all common LiPo batteries
- Full set of ball bearings, rubber sealed
- All transmission ball bearings are 8x16x5mm
- Hardened steel spur gear and motor pinion
- Three silicone fluid-filled + sealed metal differentials with quick access design
- Quick + Easy diff access
- 2-piece aluminium motor holder with composite gear cover
- Complete metal drive train
- Steel front CVD joints
- Aluminium 17 mm drive hexes
- Oil-filled threaded 16 mm aluminium Big Bore shocks
- Team Corally SPL shock spring perches locking system
- Milled aluminium shock towers, 5mm rear / 4mm front
- Independent Pivot Ball front suspension
- Independent double wishbone rear suspension
- Reinforced truck front steering blocks and rear hubs
- Aluminium suspension mounts with composite cover
- Full set of machined steel turnbuckles with 7mm hexes
- Individually adjustable chassis and steering geometry
- Team Corally RSP anti-roll bar system, front + rear
- Aluminiumchassis plate
- Bashproof double chassis brace system
- Front bumper with chassis protection
- Centre Roll cage mount
- Reinforced high downforce wing + adjustable wing holder
- Pre-glued low-profilemulti-pin pattern tyres on black 7-spoke nylon rims
- Sturdy, elaborately printed polycarbonate body
- Huge selection of custom tuning products available
- 110+ km/h (70+ mp/h) possible
Scale: 1/8 Scale
Car Model Type: Electric Powered 4WD Truggy RTR – 6S Brushless Power
Battery Type: Not included
Wheel base (mm): 384 mm
Length (mm): 584 mm
Width (mm): 443 mm
Transmission: 4WD Shaft Driven
Ball Beared: Full set of ball bearing
Motor Type: 2050kV 2-6S 4-pole brushless motor
Height (mm): 190 mm
ESC Type: Waterproof 7.2 – 22.2 V brushless – programmable with LiPo cut off
Servo Type: Digital – Metal Gear – 20 Kg Torque
Battery tray dimensions: (LxWxH): 143×50.5×50 mm
RC functions: Right/left/forward/brake/reverse
Charger: Not included
Weight (g): 4350 g
Max. possible Speed: 110+ km/h
REQUIRED TO COMPLETE
- Four (type AA) batteries
- 7.2-22.2 V battery with XT90-connector